Agresyvių terpų poveikis AB „ORLEN Lietuva“ kondensato valymo bloko įrenginiams
Magistro baigiamajame darbe buvo analizuojami korozijos pažeidimai, susidarantys naftos perdirbimo įmonės AB „ORLEN Lietuva“ kondensato valymo bloko (KVB), elektrinio druskų ir vandens šalinimo bei atmosferinės rektifikacijos įrengimų kombinuoto įrenginio LK-2 komplekso, 100-osios sekcijos įrenginiuose. Įrenginiai analizei pasirinkti, atsižvelgiant į įmonės siekius modernizuoti kondensato valymo bloką. Išanalizuoti korozijos procesui įtakos turintys veiksniai, būdingos korozijos rūšys ir nustatytos labiausiai korozijos pažeidžiamos įrengimų vietos. Eksperimentinėje dalyje buvo tiriamas anglinio plieno S235 atsparumas korozijai technologinio kondensato, druskingo vandens, sieringo ir druskingo vandens mišinio terpėse. Atsparumas korozijai buvo vertinamas pagal jo masės praradimą per laiką ir naudojant linijinės poliarizacijos varžos metodą. Tyrimo metu buvo buvo panaudotos koroziją mažinančios apsaugos priemonės. Druskingo vandens ir druskingo ir sieringo vandens mišinio terpių agresyvumas buvo mažinamas naudojant inhibitorių CHIMEC 1839. Siekiant sustiprinti paviršinį plieno S235 sluoksnį, bandiniai buvo skirtingai termochemiškai apdoroti - įazotinti ir įanglinti-grūdinti. Po to pamatuotas bandinių kietumas Vikerso metodu, ištirtas jų atsparumas korozijai sieringo vandens ir druskingo vandens terpėse.
Corrosion as a natural phenomenon is the material destructive chemical and electrochemical reaction with its surrounding environment. Corrosion is an unavoidable problem in petroleum oil refinery industries due to the complicated work conditions such as high temperature, high pressure, pH value and ion concentrations in aggressive media. As the main construction material for equipment in oil, gas and petroleum industries is steel due to his availability, and low cost. Steel is affected by corrosion. In the present research, analyses were made on the carbon steel used in the condensate treatment block (CTB) at SC "ORLEN Lietuva" and on an effect on the equipment of aggressive media in the absence and the presence of the inhibitors. To quantify corrosion rate a weigh loss method and linear polarization resistance technique (LPR) were used. The experimental results have shown that the technological condensate (sour water) from CTB is more corrosive media than the salt water from desalination unit or mixed water stream which will feed CTB after reconstruction. Inhibitor CHIMEC 1839 slowed down the corrosion process in the salt water media more than three times and in the mixed water stream more than twice. To increase the corrosion resistance of steel was chosen thermal-chemical surface hardening -nitriding and carburizing -hardening. The experimental results from weigh loss method and linear polarization resistance technique have shown that corrosion resistance provided by carburizing –hardening is better than that provided by nitriding.